I am having issues with the paddle switch on the spray unit. Had to remove the so the unit will rotate. The techs at Sunless Inc said it was the switch so they sent me a new one. Same issue... When I asked how the switch worked they could not answer.. did not have a wiring diagram... no help. It should be simple its just a simple switch. its normally closed and when actuated it opens the circuit.
The bed is usable but when the session is started the spray unit starts rotating and rotates non-stop until the cleaning cycle is activated. If the switch is put into place the unit rotates until the switch is actuated and the unit stops rotating. However the spray sprays normal, pauses for client to turn around and then continues if the unit is rotating or not...
I have cleaned all of the connectors, replaced the motor and switch.
Does anyone have any suggestions?? Many thanks in advance for any help,,
The bed is usable but when the session is started the spray unit starts rotating and rotates non-stop until the cleaning cycle is activated. If the switch is put into place the unit rotates until the switch is actuated and the unit stops rotating. However the spray sprays normal, pauses for client to turn around and then continues if the unit is rotating or not...
I have cleaned all of the connectors, replaced the motor and switch.
Does anyone have any suggestions?? Many thanks in advance for any help,,