I would need your suggestions on the ventilation and AC.
We've got the following
1 x P90 Combo
1 x iBED
2 x iDome
At later stage we are not planning to add up anymore units as the location doesn't have the adequate spacing.
The exhaust duct from each unit will be connected to a main duct (50cm x 25cm) that would be going out through the ceiling to the first floor, which is an open area outside the building. At the end of it we would be connecting a 6000cfm exhaust fan to pull all the hot air out.
The current centralized AC is only 4 TONS, therefore its decided to add an additional 5 TONS split unit AC to support the units and the total area size which is 776sq/ft.
The ceiling height would be at 3 meters with low partitions for better air flow.
Now I've heard that same amount of fresh air must be introduced into the tanning rooms from an outdoor vent. How would that be possible when the outside air is always 45C (113F) with humidity being high as well????
Your outputs would be highly appreciated
We've got the following
1 x P90 Combo
1 x iBED
2 x iDome
At later stage we are not planning to add up anymore units as the location doesn't have the adequate spacing.
The exhaust duct from each unit will be connected to a main duct (50cm x 25cm) that would be going out through the ceiling to the first floor, which is an open area outside the building. At the end of it we would be connecting a 6000cfm exhaust fan to pull all the hot air out.
The current centralized AC is only 4 TONS, therefore its decided to add an additional 5 TONS split unit AC to support the units and the total area size which is 776sq/ft.
The ceiling height would be at 3 meters with low partitions for better air flow.
Now I've heard that same amount of fresh air must be introduced into the tanning rooms from an outdoor vent. How would that be possible when the outside air is always 45C (113F) with humidity being high as well????
Your outputs would be highly appreciated